Roller Type Abrator Q3110Ⅱ/Q3113 Type
Retained moulding sand or oxide skin on castings or forging pieces surface that are turning in the roller can be cleaned by pills which are popped by tail-wagging impeller; high productivity, good cleaning effect, low consumption of power, fit for cleaning small size workpieces in medium and small size foundry and forging workshop.
Technical Spec
Model |
Q3110Ⅱ |
Q3113 |
Diameter of roller mm |
1000 |
1300 |
Internal length of roller mm |
800 |
1200 |
Rotate speed of roller r.p.m |
3 |
4 |
Max Load kg |
300 |
600 |
Max Length of Workpiece mm |
400 |
1100 |
Max Weight of Single Piece kg |
15 |
40 |
Productivity kg/nr |
600-1500 |
800-1800 |
Casting Volume kg/min |
100 |
150 |
Diameter of Pill mm |
0.8-1.2 |
0.8-2.5 |
Total Capacity of Motor kw |
9.4 |
10.88 |
Overall Dimension(Length×Width×Height)mm |
2078×2165×1861 |
2300×1955×3000 |